NS-Non-Sticky Heat Transfer
NS-Non-Sticky Heat Transfer
NS – NON-STICKY – HEAT TRANSFER VINYL
NS-Non-Sticky Heat Transfer Vinyl (NS Series) is Specially constructed to be soft and smooth to the touch, with every color embedded in the material so designs have a smooth finish. Non-sticky is available in 20 colors, including silver and gold.
Follow the color card and find the right vinyl for your desired application. To make it simple NS series is applicable for apparel such as T-shirts, Hoodies, Sweats, etc…
Non sticky HTV applies to
100% Cottoned
100% Polyester
Poly/Cotton Blends
Leather
COLOR BOOK
RECOMMENDED MODELS FOR EPULS CUTTER - LAUNCHING SOON
How to apply VENYL® HTV
Printable version of all HTV application instructions
Home Iron Instructions
- Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Preheat garment for 2-3 seconds
- Apply design at 285°F/140°C (For NS, ST and RF Series only)
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
Important note after application of VENYL HTV
- Wait 24 hours before the first wash.
- Machine wash warm or cold with mild detergent.
- Dry on normal dryer setting. Do not dry clean.
- A liquid fabric softener is not recommended.