MT – Metallic Series HTV

Home > MT – Metallic Series HTV
banner

MT – Metallic Series HTV

MT-METALLIC HEAT TRANSFER VINYL

Metallic Series HTV with a PET sticky material, this highly reflective heat transfer vinyl is an exceptional product due to its glass bead construction that illuminates for the darkness. It applies with a low application temperature of 140C and a very stable and simple warm peel. MT Series is suitable for all kinds of garments, construction uniforms, sports garments, and security uniforms.

Metallic HTV Series Applies to

100% Cottoned

100% Polyester

Poly/Cotton Blends

Leather

Metallic Color Book

colorcode

RECOMMENDED MODELS FOR EPULS CUTTER - LAUNCHING SOON

How to apply VENYL® HTV

Printable version of all HTV application instructions

Home Iron Instructions

  • Home Iron Instructions
  • Set iron dial between Cotton and Linen
  • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)

Heat Press Instructions

  • Cover with Heat Transfer Cover Sheet or Multipurpose Paper
  • Preheat garment for 2-3 seconds
  • Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

Important note after application of VENYL HTV

  1. Wait 24 hours before the first wash.
  2. Machine wash warm or cold with mild detergent.
  3. Dry on normal dryer setting. Do not dry clean.
  4. A liquid fabric softener is not recommended.